Before disconnecting Drobo storage device from your Mac or disconnecting the power from your Drobo device, you should always safely unmount the volumes stored on your Drobo.
Drobo 1st and 2nd Generation
On Drobo 1st and 2nd Generation this is done by clicking on the Standby button located in Advanced Controls -> Tools. The standby operation should take only a few seconds. Once Drobo is in Standby, all lights will turn off except for the power indicator, which will turn orange (Note: you can't see the power indicator with the front cover on Drobo). Only then, can you safely disconnect Drobo from your PC or disconnect the power from your Drobo.
Drobo S, Drobo FS, DroboPro and DroboElite
On Drobo S, Drobo FS, DroboPro and DroboElite, this is done by clicking on the Shutdown button located in Advanced Controls -> Tools. You can also press the power toggle switch on the back of the device if you have manually unmounted all the volumes contained on the Drobo storage device. After the Shutdown process completes, all the indicator lights will turn off.
Warning: Failure to properly disconnect your Drobo storage device from your Mac can cause loss of data.
Disconnecting Your Drobo from Your DroboShare
Advanced Drobo Dashboard